AK series 4ch professional power amplifier AK3004, AK5004, AK6504
AK3004
Characteristics of the
◆ Switching power supply and Class D power amplifier, high efficiency, fast speed, easy to enter the wheat, light tone, rich color
◆ Built-in power factor correction technology PFC, the current in the power supply output higher power, and can eliminate the low harmonic frequency of the switching power supply, less because of the power supply instability caused by the buzz and distortion
◆ Automatic identification and switching voltage 90V-260V, the world voltage can be used, in the underdeveloped, low voltage area can also operate reliably
◆R-SMPS regulated switching power supply, in the case of unstable power supply, can provide a strong power supply guarantee for the best sound effects
Extremely light weight of the whole machine, reduce labor and logistics transportation costs
◆ Front and back heat dissipation and exhaust system design, to ensure the equipment long time, high reliable performance operation and use
◆ The signal to noise ratio is greater than 100dB, under the requirement of quiet and strict environment, can not hear the bottom noise
Front panel independent channel with temperature, protection and peak cutting light warning
Front panel independent channel with power indicator and -5dB/-10dB/-20dB signal light indicator
◆ The rear panel has XLR input socket and link socket
◆ The rear panel has a Speakon NI4 output socket and a red and black terminal output socket
◆ The back panel has a sensitivity selector switch of 0.775V/1V/32dB
The back panel has stereo, parallel connection, bridge three connection modes to choose
The back panel has 1-in 4Out/ 2-in 4Out connection mode selection
parameter
Power: 8 Ω 4 x 4 x 300 w / 500 w / 4 2 Ω Ω 4 x 750 w / 1000 w * 2/8 Ω bridge 1500 w * by 2/4 Ω bridge
◆ Frequency response: 20Hz-20KHz,+/-1dB
◆ Total harmonic distortion: ≤0.1%
◆ SNR: ≥100dB
◆ Damping coefficient: ≥500
◆ Input sensitivity: 0.775V / 1V /32dB
◆ Input impedance (balance/imbalance) : 20KΩ/10K at
◆ Voltage gain (8Ω) : 36dB
◆ Cooling: Ventilation from front to back
◆ Product dimension (mm) : 483×435×89
◆ Gross weight: 10.7kg
AK5004
Characteristics of the
◆ Switching power supply and Class D power amplifier, high efficiency, fast speed, easy to enter the wheat, light tone, rich color
◆ Built-in power factor correction technology PFC, the current in the power supply output higher power, and can eliminate the low harmonic frequency of the switching power supply, less because of the power supply instability caused by the buzz and distortion
◆ Automatic identification and switching voltage 90V-260V, the world voltage can be used, in the underdeveloped, low voltage area can also operate reliably
◆R-SMPS regulated switching power supply, in the case of unstable power supply, can provide a strong power supply guarantee for the best sound effects
Extremely light weight of the whole machine, reduce labor and logistics transportation costs
◆ Front and back heat dissipation and exhaust system design, to ensure the equipment long time, high reliable performance operation and use
◆ The signal to noise ratio is greater than 100dB, under the requirement of quiet and strict environment, can not hear the bottom noise
Front panel independent channel with temperature, protection and peak cutting light warning
Front panel independent channel with power indicator and -5dB/-10dB/-20dB signal light indicator
◆ The rear panel has XLR input socket and link socket
◆ The rear panel has a Speakon NI4 output socket and a red and black terminal output socket
◆ The back panel has a sensitivity selector switch of 0.775V/1V/32dB
The back panel has stereo, parallel connection, bridge three connection modes to choose
The back panel has 1-in 4Out/ 2-in 4Out connection mode selection
parameter
Power: 8 Ω 4 x 4 x 500 w / 750 w / 4 2 Ω Ω 4 x 950 w / 1300 w * 2/8 Ω bridge 1900 w * by 2/4 Ω bridge
◆ Frequency response: 20Hz-20KHz,+/-1dB
◆ Total harmonic distortion: ≤0.1%
◆ SNR: ≥100dB
◆ Damping coefficient: ≥500
◆ Input sensitivity: 0.775V / 1V /32dB
◆ Input impedance (balance/imbalance) : 20KΩ/10K at
◆ Voltage gain (8Ω) : 38.2dB
◆ Cooling: Ventilation from front to back
◆ Product dimension (mm) : 483×435×89
◆ Gross weight: 11kg
AK6504
Characteristics of the
◆ Switching power supply and Class D power amplifier, high efficiency, fast speed, easy to enter the wheat, light tone, rich color
◆ Built-in power factor correction technology PFC, the current in the power supply output higher power, and can eliminate the low harmonic frequency of the switching power supply, less because of the power supply instability caused by the buzz and distortion
◆ Automatic identification and switching voltage 90V-260V, the world voltage can be used, in the underdeveloped, low voltage area can also operate reliably
◆R-SMPS regulated switching power supply, in the case of unstable power supply, can provide a strong power supply guarantee for the best sound effects
Extremely light weight of the whole machine, reduce labor and logistics transportation costs
◆ Front and back heat dissipation and exhaust system design, to ensure the equipment long time, high reliable performance operation and use
◆ The signal to noise ratio is greater than 100dB, under the requirement of quiet and strict environment, can not hear the bottom noise
Front panel independent channel with temperature, protection and peak cutting light warning
Front panel independent channel with power indicator and -5dB/-10dB/-20dB signal light indicator
◆ The rear panel has XLR input socket and link socket
◆ The rear panel has a Speakon NI4 output socket and a red and black terminal output socket
◆ The back panel has a sensitivity selector switch of 0.775V/1V/32dB
The back panel has stereo, parallel connection, bridge three connection modes to choose
The back panel has 1-in 4Out/ 2-in 4Out connection mode selection
parameter
◆ Power: 4×650W/8Ω 4×1100W/4 ×1550W/2 and 2000W×2/8 wire bridge 2600W×2/4 wire bridge
◆ Frequency response: 20Hz-20KHz,+/-1dB
◆ Total harmonic distortion: ≤0.1%
◆ SNR: ≥100dB
◆ Damping coefficient: ≥500
◆ Input sensitivity: 0.775V / 1V /32dB
◆ Input impedance (balance/imbalance) : 20KΩ/10K at
◆ Voltage gain (8Ω) : 39.3dB
◆ Cooling: Ventilation from front to back
◆ Product dimension (mm) : 483×435×89
◆ Gross weight: 11.3kg